At a ç, At d 23 11 ç, At e – Magellan GLOBAL SATELLITE TELEPHONE User Manual
Page 131: At e0 ç, At e1 ç, At h ç, At o ç
WorldPhone – Chapter 5. Appendices
D-3
Basic AT commands
Note! AT commands may be entered in either upper or lower case
(not mixed).
AT A ç
instructs the WorldPhone ASD to connect the line and
start the answer sequence of the incoming call. Used
when not configured for auto answer.
AT D 00 47 67 24 47 00 ç
instructs the WorldPhone ASD to dial the number
00 47 67 24 47 00 via the default Net service provider.
AT D 4* 00 47 67 24 47 00 ç
instructs the WorldPhone ASD to dial the number
00 47 67 24 47 00 via the selected Net service provider,
e.g. Telenor (Norwegian Telecom, code no.4).
AT D 23 11 ç
dials the telephone number stored
under short number 11.
AT E
[n]
ç
sets local echo of keyboard commands on/off:
AT E0 ç
turns local echo OFF.
Default
AT E1 ç
turns local echo ON.
AT H ç
hook control:
AT H ç
sets the WorldPhone ASD ON-hook
when in Online Data Mode. Disconnects the line and
terminates the call.
AT O ç
returns to Online Data Mode when in Online Command
Mode during a data call.
Appendix D – AT commands cont’d
AT commands cont’d