Philips Magnavox 9MDPF20 - Manual (Page 17)

Rear Panel 17
AUDIO OUT
DC 13.2V
L
R
COAXIAL
ANT.
Power Cord
Connect to a standard AC outlet (120V/60Hz).
AUDIO OUT L/R jacks
(Audio Out, left and right, white and red)
Connect these jacks to an analog Stereo.The Stereo will have
right and left Audio In jacks.This means it receives and sends
sound through two channels, the right and the left.These jacks
are usually red and white on the Stereo.
Details are on page
11.
COAXIAL Jack
(Digital Audio Out) (orange)
Connect this jack to a Digital Stereo using a digital audio coaxial
cable (not supplied). Use this connection if the Stereo has Dolby
Digital compatibility and has a Digital Coaxial Audio In jack.You
may also use this connection when connecting the TV/DVD to a
Mini-Disc or Digital Audio Tape deck. Details are on page
11.
ANT. Jack
(Antenna In)
Connect an antenna or Cable TV signal here.This brings TV
channels to the TV/DVD. If you do not connect an antenna or
Cable TV signal to the TV/DVD (or connect to a Cable
Box/Satellite Receiver through this jack), you will not receive any
TV channels. Details are on pages eight to nine.
DC 13.2V Jack
Connect the car battery cord here. Details are on page
10.
Antenna Hole
Connect the stem or base
of the supplied rod
antenna here. Details are
on page
nine.
TD007_9MDPF20_V3.QX33 04.2.18 1:51 AM Page 17