Miele NOVOTRONIC W 1966 - Manual (Page 30)

With the following guide, minor problems can be fixed without a service call.
The program will not start.
What if … Possible cause Fix
the program indicator
"Anti-crease/End" does
not light, or the START
button does not blink? The washer has no
power. Check whether:
– it is plugged in.
– if the circuit breaker
has tripped.
the "Door Lock" indica-
tor blinks? The lock function is acti-
vated. Deactivate the lock
function.
The program stops and a fault indicator blinks.
What if … Possible cause Fix *
the fault indicator
"Check drain" blinks? The drain is blocked. Clean the lint trap and the
drain pump.
The drain hose is too
high. The maximum drain
pump height is 3 ft (1m).
the fault indicator
"Water intake" blinks? The water inlet is blocked. Open the water valve.
The inlet hose filter is
clogged. Clean the filter under run-
ning water and carefully
remove any large parti-
cles.
the "Soak", "Heavy soil"
or "Sensitive" indica-
tors blink? There is a fault. Start the program one
more time. If the fault
message appears again
call Miele’s Technical Ser-
vice Department.
* To turn off the fault indicator light: Turn off the washer with the "On/Off" button
and turn the program selector to "End".
Frequently asked questions
26