Caution – Motorola SG4-DRT-2X User Manual

Page 18

Advertising
background image

CAUTION

RISK OF ELECTRIC SHOCK

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

CAUTION:

Caution

These servicing instructions are for use by qualified personnel only. To reduce the risk of electrical shock, do not perform any servicing other
than that contained in the Installation and Troubleshooting Instructions unless you are qualified to do so. Refer all servicing to qualified service
personnel.

Special Symbols That Might Appear on the Equipment

INVISIBLE LASER RADIATION

PEAK POWER 5.0mW

WAVELENGTH 1300nm

CLASS IIIb LASER PRODUCT
CHAPTER 1 SUBCHAPTER J

THIS PRODUCT COMPLIES WITH 21CFR

AVOID DIRECT EXPOSURE TO BEAM

DANGER

This is a class 1 product that contains a class IIIb laser and is intended for operation in a closed environment
with fiber attached. Do not look into the optical connector of the transmitter with power applied. Laser output is
invisible, and eye damage can result. Do not defeat safety features that prevent looking into optical connector.

This product contains a class IIIb laser and is intended for operation in a closed environment with fiber
attached. Do not look into the optical connector of the transmitter with power applied. Laser output is invisible,
and eye damage can result. Do not defeat safety features that prevent looking into optical connector.

For continued protection against fire, replace all fuses only with fuses having the same electrical ratings
marked at the location of the fuse.






MOTOROLA, the Stylized M Logo, and STARLINE are registered in the US Patent & Trademark Office. All other product or service
names are the property of their respective owners.

© Motorola, Inc. 2004.

509978-001
8/04

All rights reserved.
No part of the contents of this manual may be reproduced or transmitted in any form or by any means without the
written permission of the publisher.

MGBI

Advertising