Miele H334B - Manual (Page 26)

Selecting a temperature
As soon as the programme selector is
turned to a setting the following will
appear in the display
– the recommended pre-set
temperature ,
– the symbols of any function that can
be altered from this programme
selector position.
If you are happy with the recommended
pre-set temperature, the display will
change a few seconds later to show
this as the
target temperature .
The oven starts to heat up.
The display will then change to show
the
actual temperature in the oven,
and depending on which programme is
being used the symbol
p or U will also
show.
The increase of temperature can be
followed in the display until the target
temperature is reached.
If the door is opened or the target
temperature reduced during cooking,
the actual temperature will also go
down in the display.
The following temperatures are set at
the factory:
Fan
D. . . . . . . . . . . . . . . . . . . . . 160 °C
Auto Roast
E *. . . . . . . . . . . . . 160 °C
Conventional
A . . . . . . . . . . . . . 190 °C
Bottom heat
B . . . . . . . . . . . . . . 190 °C
Fan grill
N . . . . . . . . . . . . . . . . 200 °C
Grill
n. . . . . . . . . . . . . . . . . . . . . 240 °C
* The initial boosted temperature is
approx. 230 °C, which then drops
down to 160 °C for continued
roasting.
Altering the temperature
If the temperature recommended by the
system is not suitable, it can be altered
according to oven function within the
following range:
Fan
D . . . . . . . . . . . . . . . . . 30 – 250 °C
Auto Roast
E . . . . . . . . . 100 – 230 °C
Conventional
A . . . . . . . . . 30 – 280 °C
Bottom heat
B . . . . . . . . . 100 – 250 °C
Fan grill
N . . . . . . . . . . . . 50 – 260 °C
Grill
n. . . . . . . . . . . . . . . . 200 – 300 °C
To do this:
^ Using the (+/–) input dial enter the
required temperature.
If you have already entered times for
an automatic programme, you will
first have to call up the
p or U
symbol on the display before you
can alter the temperature.
Using the oven
26