Miele H334B - Manual (Page 52)

Stainless steel fronted
appliances
The appliance front and controls are
susceptible to scratches and abrasion.
Please observe the cleaning
instructions for
– stainless steel surfaces,
– stainless steel coloured controls
Stainless steel surfaces
Stainless steel surfaces can be cleaned
using a proprietary non-abrasive
cleaning agent designed specifically
for use on stainless steel, or with the
Miele E-Cloth.
Avoid:
– cleaning agents containing soda,
acids or chlorides,
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents.
To help prevent re-soiling, a proprietary
conditioning agent for stainless steel
can also be used.
Apply sparingly with an even pressure
following the direction of the "grain".
Stainless steel coloured controls
The controls may suffer
discolouration or damage if soiling is
left on them for too long.
Remove any soiling straight away.
Avoid:
– cleaning agents containing soda,
acids or chlorides,
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents,
– stainless steel cleaners,
– oven sprays.
If you are unsure about a particular
product or need further advice please
contact your nearest Miele Sales
office. See back page for address.
Accessories
Do not leave accessories in the oven
when they are not in use.
Racks and side supports
The stainless steel surfaces of these
have been treated with PerfectClean
enamel.
They should be cleaned in the same
way as other surfaces coated with
PerfectClean. See "PerfectClean".
Roasting filter
Clean in a solution of hot water and a
little washing up liquid or in the
dishwasher.
Note: some dishwasher detergents may
cause the surface of the metal filter to
discolour. This discolouration will not
affect the functioning of the filter in any
way.
Cleaning and care
52