Morphy Richards 29007 - Manual (Page 5)

Setting the time
1 Press the SET CLOCK WAKE button and the indicator will appear on the
display.
2 Press the DOWN button or UP button to adjust the time whilst the clock symbol
is displayed.
Note:
Press and hold the UP or DOWN buttons to skip through the settings with speed.
The time display has a 12 hour format. The AM / PM indicator will change to AM
or PM time respectively.
3 After a few seconds the indicator will disappear.
Setting wake up time
1 Press the SET CLOCK WAKE button twice to set the alarm 1 time. will
appear on the display.
2 Press and hold UP or DOWN buttons to set the alarm / wake up time.
3 After a few seconds,
will disappear.
4 To set alarm 2, press the SET CLOCK / WAKE button until appears on
the display and repeat the above steps.
• To change to another alarm / wake mode (e.g. from CD to radio), simply press
WAKE 1 or WAKE 2 to scroll through the wake options.
Setting wake to buzzer alarm
1 Press the WAKE 1 button to select wake to buzzer alarm until the buzzer alarm 1
symbol appears on the display. Repeat for wake 2 if required.
2 The clock radio has a graduwake feature, the alarm tone will increase gradually to
a maximum volume in about 30-45 seconds. It is not possible to adjust the alarm
tone with the volume control.
5