Marantz CDR500 - Manual (Page 15)

10
ENGLISH
4 4 4 4 4 To start recording press 0 0 0 0 0 (4).
➔ The display shows the real remaining time for the se-
lected recording. High speed recording starts.
lights continuously.
• To check the elapsed recording time, press TIME (14) or
DISPLAY (77). This can be done during recording.
• Recording will stop automatically.
5 5 5 5 5 To stop recording manually, press 9 9 9 9 9 STOP (5, 87).
➔ goes out and recording stops.
• If 9 STOP (5, 87) is pressed within 3 seconds after 0 (4) is
pressed, no recording will take place.
• After recording, the display shows for several sec-
onds. The Total time indications can differ slightly. However,
no music information is lost.
Note:
- In this Recording mode, the Pause function is not operative.
Important:
If you want to play the recorded CD-R/RW disc on any regu-
lar CD player, it must first be finalized. (See FINALIZING/
UNFINALIZNG page 15).
Finalized CD-RW discs play only on CD-RW compatible CD
players.
There is a chance that the sound will be distorted if the
recording level is set at a value that exceeds 0 dB for dig-
ital sound sources and -12dB for analog sound sources.
The factory settings at the time of shipping are 0 dB for
digital sound sources and -12dB for analog sound
sources.
RECORDING (FROM INTERNAL CD-PLAYER)
The numbers between parentheses refer to the fold-out.
Double speed recording
Using the internal CD-Player drive.
•
During double speed recording the sound is not audible.
1 1 1 1 1 Make sure that the recording disc is absolutely free of
scratches and dust particles.
2 2 2 2 2 To choose the type of recording, press REC MODE (10).
once: to select if you wish to make a
fast recording of a disc or programmed tracks.
three times: to select if you wish to make a
fast recording of a disc or programmed tracks
and to automatically finalize the recording.
Also see ‘FINALIZING CD-R & CD-RW’ discs
on page 15.
The display starts blinking. After 3 sec-
onds the display shows the remaining CD-R/RW record-
ing time on the left and total time of source on the right.
(every 2 seconds
is displayed.)
Both selection indicators are lit.
3 3 3 3 3 Press PROG (18 or 91) to select one or more tracks for
recording (see PROGRAMMING):
-
rotate the REC LEVEL/SELECT (13) key to the required
track number, then press REC LEVEL/SELECT (13).
or:
- directly select the track number via the 10-keypad (76)
on the remote control, then press REC LEVEL/SELECT
(13).
MENU/
STORE CANCEL/
DELETE
0
9 8 7
6 5 4
3 2 1
RANDOM PROG. REPEAT SCAN
CD CDR
ABC DEF GHI
JKL MN OPQ
RST UVW XYZ
DISPLAY SPACE SCROLL
FUNCTION
ENTER
HEADPHONE
CD RECORDER/CD PLAYER CDR500
PROG
FINAL
TEXT LEVEL TIME
CD PLAY MODE CDR
INPUT
ERASE MENU REC.M POWER
IR
STANDBY
0 10
PUSH ENTER
REC LEVEL/SELECT
DELETE
STORE
CANCL
Recordable ReWritable
w
w
r
w
w e r q
CDR500U Eng 01-14 10/11/00, 9:31 AM 10