Muratec Printer/Copier/Scanner MFX-C3035 - Manual (Page 370)

Registering a user 15-11
When registering a user, you can only enter the card ID and associate the
user with card using the authentication device unit connected to this machine.
1
Turn the main power switch on.
2
To register a user and card with Data Administrator at a time, connect the
authentication device to the USB port of the computer that contains Data
Administrator.
"
Do not connect another USB device to the same port as for the
authentication device. Doing so reduces the USB power supply,
resulting in an operation failure.
"
To use the USB hub, be sure to connect the self-power USB hub that
supplies 500 mA or more.
"
Restart the procedure 5 or more seconds after connecting the authen-
tication device.
3
Data Administrator starts, and device information of this machine is
imported.
The Device Information window appears.
– For details on how to import device information, refer to the Data
Administrator User's Guide.