Memorex MD6440cp - Manual (Page 5)

- 4 -
CAR KIT OPERATIONS
The cassette adaptor allows you to use your portable CD player with your car stereo cassette system
or protable audio cassette system.
1. Position the cassette adaptor cord so the cord extends out from the cassette player when the
cassette is inserted. Insert the cassette adaptor in the same direction as you would insert an audio
cassette tape.
2. If the cassette adaptor cord is on the wrong side of the tape,
reposition the cord to the opposite corner of the channel.
3. Insert the cassette adaptor stereo plug into the headphones jack
on the left side of the CD player.
4. Turn on the cassette player. Press PLAY on the cassette player.
5. Press PLAY on the CD player.
6. Set the volume of the CD player to a mid-level. Adjust the
volume of the cassette player.
Notes: • The cassette adaptor has the play head on one
side only. If you insert the cassette and no
sound is heard, try turning the cassette over
or pressing the reverse button to change
direction.
• The car cassette adaptor may not be
compatible with all makes and models of
cassette players.
Use the Cigarette Lighter Adaptor for power when using the CD player in a car.
1. Plug the adaptor into the car cigarette lighter.
2. Plug the pin into the DC jack on the unit.
Notes: The supplied DC car adaptor / cord is designed for use with vehicles equipped with a 12 volt
negative ground electrical system only.
A B
To Headphones Jack
To Cassette Deck
To Cigarette Lighter
To DC Jack