McDATA Sphereon 4500 - Manual (Page 124)

3
3-28 McDATA® Sphereon™ 4500 Fabric Switch Product Manager User Manual
Configuring the Switch
This file cannot be used to set configuration parameters through the Product
Manager.
Data in the file includes:
• Product identification
Data input into the Configure Identification dialog box.
• Operating parameters
Data input into the Operating Parameters (Switch and Fabric) dialog
box.
• Port parameters
Data input into the Configure Ports dialog box.
• SNMP parameters
Data input into the Configure SNMP dialog box.
• Active zoning configuration
This specifies the active zone and zone members, if set, and
whether the default zone is enabled or disabled.
Procedure To export a configuration report:
1. Select Export Configuration Report from the Configure menu on the
menu bar.
The Export Configuration Report dialog box displays.
Figure 3-15 Export Configuration Dialog Box
Drive List
Go Up One Level
Home
Create New
Folder
File List
Details