Metrologic Instruments MS6130 MX003 - Manual (Page 30)

26
A UDIBLE I NDICATORS (C ONTINUED )
The “MX” receiver can be programmed to emit three
beeps when the timeout occurs during communication
between the host and receiver. Refer to the MS4120
Programming Guide section, Audible Indicators for
Communication Timeouts to program this feature.
There are four settings available for the tone of the beep for the receiver.
Refer to the MS4120 Programming Guide section, Beeper Tones to program
the feature to change the tone or turn the beeper off.