MTD 6FE - Manual (Page 23)

23
Styles E & F
REF.
NO.
PART
NO. DESCRIPTION
1 684-0036A Handle Ass’y, Engagement RH Black
2 684-0037 Handle Ass’y, Engagement, LH Black
3 710-0726 Screw, Self-tapping, 5/16-12, 0.750
4 710-1233 Screw, Machine, #10-24, 1.375
5 711-0677 Ferrule, 5/16-18 x .312 Diameter
6 712-0161 Nut, Hex Lock, #10-24, Gr2, Nylon
7 712-04063 Nut, Flange Lock, 5/16-18, Grf, Nylon
8 712-04064 Nut, Flange Lock, 1/4-20, Grf, Nylon
9 714-0104 Pin, Cotter, .072 Diameter x 1.13
10 720-0274 Grip, 1.0 ID x 5.0
11 720-04039 Shift Knob, Black
12 726-0135 Nut, Push, 5/16
13 631-04134 Handle, Clutch Lock, RH
14 631-04133 Handle, Clutch Lock, LH
15 732-0193 Spring, Compression, .39x.60 x .88
16 732-04205 Spring, Shift, Lever
17 735-0199A Bumper, Rubber, .62 OD x .22
18 790-00156 Bracket, Shift Spacer
19 738-04118 Bolt, Shoulder, 5/16-18 x 0.830
20 738-04122 Screw, Shoulder, .437 x 1.345, 1/4-20
21 746-0778 Z Fitting, Cable
22 747-04347 Rod, Shift, .312 x 11.5 Upper
23 747-04280 Rod, Shift, Lower
24 750-0963 Connector Sleeve, Shift Rod
25 790-00116 Lever, Shift, Speed
26 790-00129 Panel, Handle, E-Style
790-00108 Panel (w/ Cutout), Handle, F-Style
27 684-04104 Crank Assembly, Chute
28 710-0449 Screw, Carriage, 5/16-18, 2.25, Gr5
29 712-04081A Shoulder Nut, Hex, 1/4-20
30 720-0284 Knob Assembly, Wing Nut, 5/16-18
31 720-0201A Crank Knob, 1.0 Diameter x 3.2, Black
32 726-0100 Cap, Push, 3/8 Rod
33 735-0234 Grommet, .44 ID x .94 OD x .50
34 736-0185 Washer, Flat, .375 x .738 x .063
35 736-0451 Washer, Saddle, 320 x .93 x .060
36 747-04263 Eye Bolt, Chute Crank
37 749-04138 Handle, Lower, Snow
38 749-04141 Handle, Upper, RH
39 749-04142 Handle, Upper, LH
40 725-04220 Harness, Headlight
41 725-1658 Lamp, Halogen, 12V, 27W
42 725-1672 Lens Assembly, Lamp
43 747-1136 Retainer, Lens
44 731-04894 Plate, Lock
45 731-04896 Cam, Lock
46 711-04287 Rod, Pivot
47 710-04354 Screw, 1/4-20, .375
48 710-04326 Screw, #8-18 x .50
49 732-04219 Spring, Control Lever Lock
50 732-04238 Spring, Torsion, .8156 x .3038
51 736-0262 Washer, Flat, .385 x .870 x .092
NOTE:
Snow thrower features and components vary by model. NOT all parts listed above and pictured on the previous page
are standard equipment.