Murphy Pressure Transmitters PXT-01041B - Manual (Page 2)

PXT-01041B page 2 of 2
How to Order
To order, please use the part number designation below.
Part number example:
PXT-100
_____ – _____
Pressure Range†:
Specify For this range
30V30WC -30” H20 to +30” H20 (-76 cm H20 to +76 cm H20) [+/-0.075 Bar]
30V30 -30” Hg to +30 psig (-76 cm Hg to 207 kPa) [2.07 Bar]
30V100 -30” Hg to +100 psig (-76 cm Hg to 689 kPa) [6.89 Bar]
15 0-15 psi (103.4 kPa) [1.03 Bar]
60 0-60 psi (413.7 kPa) [4.13 Bar]
100 0-100 psi (689 kPa) [6.89 Bar]
200 0-200 psi (1.38 kPa) [13.78 Bar]
300 0-300 psi (2.07 kPa) [20.67 Bar]
400 0-400 psi (2.75 MPa) [27.56 Bar]
600 0-600 psi (4.14 kPa) [41.34 Bar]
1000 0-1,000 psi (6.89 MPa) [68.9 Bar]
2000 0-2,000 psi (13.79 MPa) [137.8 Bar]
3000 0-3,000 psi (20.69 MPa) [206.7 Bar]
5000 0-5,000 psi (34.48 MPa) [344.5 Bar]
6000 0-6,000 psi (41.37 MPa) [413.4 Bar]
†
NOTE: Conversions are approximate.
Model
PXT =
Loop Resistance Graph
Supply voltage for the PXMS must be within range of 9-30 VDC. The Graph below
shows the minimum supply voltage (VDC) required for a given load resistance (RL).
1500
1000
500
250
10 20 30 40 50 14 V @
250
ohm
0
T
otal Load Resistance (RL)
*
(OHMS)
Power Supply Voltage (VDC)
* NOTE: Cable resistance effect included in RL.
19V, 500 Ω
29V, 1000 Ω
Under
Voltage
Area
Operating
Area
Over
Voltage
Area
PXT Series Dimensions
Low Pressure Units
1/4 NPTF
2.08 in.
(53 mm)
7/8 Hex
316 Stainless
Steel Housing
2 in.
(51 mm)
2.30 in.
(58 mm)
2.30 in.
(58 mm)
.86 in.
(22 mm)
.866 A/F
1/2 NPTM
7/8 Hex
316 Stainless
Steel Housing
60 in. (1524 mm)
long cable-std.
.86 in.
(22 mm)
1.18 in. Dia.
(30 mm)
1/4 NPTF
1.18 in. Dia.
(30 mm)
.866 A/F
1/2 NPTM
60 in. (1524 mm)
long cable-std.
High Pressure Units
In order to consistently bring you the highest quality, full featured products, we reserve the right to change our
specifications and designs at any time. MURPHY, the Murphy logo, are registered and/or common law
trademarks of Murphy Industries, Inc. This document, including textual matter and illustrations, is copyright
protected by Murphy Industries, Inc., with all rights reserved. (c) 2006 Murphy Industries, Inc.
www.fwmurphy.com
918.317.4100 Email: [email protected]