Programmable buttons, Assignable radio functions, Identifying radio controls – Motorola 4550 User Manual

Page 14

Advertising
background image

Identifying Radio Controls

English

4

Programmable Buttons

Your dealer can program the programmable buttons as
shortcuts to radio functions or up to a maximum of six (6)
preset channels/groups depending on the duration of a button
press:

•

Short press

–

Pressing and releasing rapidly (0.05 seconds).

•

Long press

–

Pressing and holding for the programmed

duration (between 1.00 second and 3.75 seconds).

•

Hold down

–

Keeping the button pressed.

NOTE: The programmed duration of a button press is

applicable for all assignable radio/utility functions or
settings. See Emergency Operation on page 36 for
more information on the programmed duration of the
Emergency button.

Assignable Radio Functions

Contacts

–

Provides direct access to the Contacts list.

Emergency

–

Depending on the programming, initiates or

cancels an emergency alarm or call.

Ext PA On/Off

–

Toggles the audio routing between the

connected public address (PA) loudspeaker amplifier and the
radio’s internal public address (PA) system.

Manual Site Roam*

–

Starts the manual site search.

Manual Dial

–

Initiates a call by keying in any subscriber

ID. Only available with a keypad microphone.

Nuisance Channel Delete*

–

Temporarily removes an

unwanted channel, except for the Selected Channel, from the
scan list. The Selected Channel refers to the user’s selected
zone/channel combination from which scan is initiated.

One Touch Access

–

Directly initiates a predefined Group

or Private Call, a Call Alert or a Quick Text message, or returns
the user to a preset channel.

Option Board Feature

–

Toggles option board features on or

off for option board-enabled channels.

PA On/Off

–

Toggles the radio’s internal public address (PA)

system on or off.

Permanent Monitor*

–

Monitors a selected channel for all radio

traffic until function is disabled.

Privacy

–

Toggles privacy on or off.

Radio Check

–

Determines if a radio is active in a system.

Radio Enable

–

Allows a target radio to be remotely

enabled.

Radio Disable

–

Allows a target radio to be remotely

disabled.



* Not applicable in Capacity Plus

NAG_6880309T15.book Page 4 Tuesday, March 9, 2010 11:47 AM

Advertising
This manual is related to the following products: