Meritline.com ML 220 - Manual (Page 12)

7.4.1Query Phone Book
Press SET/OK to the submenu and use UP and DOWN to select ‘Query Phone Book’.
Press SET/OK and use UP and DOWN to do query.
7.4.2Add new numbers
Press SET/OK to the submenu and use UP and DOWN to select ‘Add Phone Number’.
Press SET/OK to add new numbers.
Note: The limit is 112 pieces records.
7.4.3Delete Phone Number in the Phone Book
A prompt to delete your phone number would pop up if you press SET/OK after entering your Phone Book.
Press SET/OK to add new numbers.
7.5Hold
Press HOLD to block the voice.
7.6 Back Space
If entered a wrong number or letter, press the ‘BACKSPACE’ button to delete the last entry.
7.7 Hand Free Function
Press the ‘SPEAKER’ button can enable hand free conversation.
7.8 Upgrade
Press ‘SET/OK’ to enter the main menu, and use ‘UP’ and ‘DOWN’ to scroll and select ‘Advanced Settings’.
Press SET/OK to the submenu and use UP and DOWN to select ‘Upgrade Now!’.
Press SET/OK to upgrade.
NOTE: If no notice, please do not change the contents of ‘Upgrade Now!’.
7.9 AbbrDialPlan
Press ‘SET/OK’ to enter the main menu, and use ‘UP’ and ‘DOWN’ to scroll and select ‘Advced Settings’.
7.9.1Use AbbrDialPlan
Press SET/OK to the submenu and use UP and DOWN to select ‘Use AbbrDialPlan’
Press SET/OK and then input 1.
7.9.2Cancel AbbrDialPlan
Press SET/OK to the submenu and use UP and DOWN to select ‘Use AbbrDialPlan’
Press SET/OK and then input 0.
7.9.3Query AbbrDial
Press SET/OK to the submenu and use UP and DOWN to select ‘Query AbbrDial’;
Press SET/OK and then use UP and DOWN to check. There are altogether 10 pieces records in AbbrDial.
[Short Number form 0 to 9, Long Number is what the specific short number stands for.]
7.9.4Add AbbrDialPlan
Press SET/OK to the submenu and use UP and DOWN to select ‘Add AbbrDialPlan’.
Press SET/OK to add AbbrDialPlan.
7.9.5Delete AbbrDialPlan
Press SET/OK to the submenu and use UP and DOWN to select ‘Query AbbrDial’;
Press SET/OK and use UP and DOWN to choose the particular piece of record you want to delete, press
SET/OK to delete. Press ESC to cancel.
7.10 Speed Dials: M1---M8
7.10.1SpeedDial Query
Just press the M1---M8 key to display the Speed Dial number. Press “Call” to launch this number.
7.10.2Add Speed Dial number
Press M1---M8. If Speed dial is empty screen will display “Speed Dial Empty Add number/SetOk”. Press
SET/OK. Key in Contact’s Name (refer Section 4 of this guide) followed by SET/OK and then enter the