MaxTech NX-32PCI - Manual (Page 3)

2
2.1 Unpacking Your Network Adapter
Your package should contain the following items:
Adapter Card BNC T-connector
Driver disk User's Guide
The back plate of the card has
the following features (See Fig-
ure 2-1):
• 2 network cable connectors:
RJ45 Connector for
10BASE-T networks
BNC Connector for
10BASE-2 networks
• 2 LED indicators with the fol-
lowing functions:
LINK (green) - Link Status.
The card is success-
fully connected to a
10Base-T network. Not
used with BNC con-
nections.
ACT (green) - Network ac-
tivity. Indicates when
the card is receiving
network data.
2.2 Hardware Installation
Installation of this adapter card requires opening
and manipulating your PC. Exercise caution at all
times when working with AC powered and static-
sensitive equipment. Turn off and unplug your PC
before installation. Discharge any static electricity
from your body by touching any metal surface.
Note: If you are also installing the optional boot
ROM, refer to Section 2.2.1 for detailed ROM
installation instructions before beginning adapter
installation.
Figure 2-1
BNC
ACT LINK
RJ-45