Miele K 9412 I EN - Manual (Page 14)

Before using for the first time
Important:
To ensure the correct functioning of
the appliance, let it stand for
between 1½ and 2 hours after
transporting it to its final location
before connecting it to the mains.
Protective foil
The stainless steel trim to the interior
shelves and the door shelves has a
layer of protective foil to prevent
damage during transportation.
^ Carefully remove the protective foil
from the stainless steel trim.
Cleaning
^ Clean the inside of the appliance and
the accessories with lukewarm water
and a little washing-up liquid, and
then dry with a soft cloth.
Switching on
^ Using a coin, turn the On/Off dial in a
clockwise direction away from the "0"
position until the temperature display
lights up.
Forcing the dial beyond its range will
damage it. Turn it only as far as it
will go, then turn it back again.
The appliance begins to cool down,
and the temperature required for the
refrigerator shows in the temperature
display. The interior light will come on
when the door is opened.
To enable the temperature to get
sufficiently cold inside the appliance,
allow the appliance to run for a few
hours before placing food in it.
Switching off
^ Using a coin, turn the On/Off dial in
an anti-clockwise direction back to
the "0" position.
The temperature display will go out and
the cooling process will be switched
off.
Switching on and off
14