Owner’ s manual – MACKIE 400F User Manual
Page 25
25
Owner’s Manual
Owner’
s Manual
panel should be the same as the buffer size selected in
the Onyx 400F Console.
Note: If you change the buffer size in the ASIO con-
trol panel, you may need to close and reopen the Onyx
400F Console to update the buffer setting.
About
This opens a box that tells you about the Onyx 400F
Console Control Panel.
Version Information
These let you know the version of the Console soft-
ware, the version of the fi rmware currently installed
in the Onyx 400F, the 1394 (FireWire) driver version
and the ASIO driver version currently installed on the
computer.
Software and fi rmware updates are installed using an
newer versions of the software and fi rmware are avail-
able to download. Better yet, make sure you register
your 400F either online or with the enclosed Product
Registration Card, and we will notify you by email when
updates become available.
Save/Load
The Save button allows you to save the current state
of the Onyx 400F Console as a preset fi le that can be
recalled at a later time. When you click the Save button,
a dialog box opens that allows you to name the fi le and
select the destination.
The Load button allows you to recall a preset fi le.
When you click the Load button, a dialog box opens that
allows you to select from a list of presets.
The name of the current preset appears in the “Pro-
gram” box next to the Save/Load buttons.
Standalone Mode: When the Console
software application is closed, the
Onyx 400F continues to operate with
whatever settings were present when
the Console was closed. When the
Onyx 400F is turned off, the current
settings are saved to its internal fl ash memory, and re-
called when the 400F is turned back on (program name:
Flash Settings).
This allows you to setup the Onyx 400F for a particu-
lar application, such as a 2-channel mic pre or a 10x2
mixer, and use it in that application without having it
connected to a computer (standalone mode).