Miele ESW 4088-14 - Manual (Page 35)

^ Remove the cable tie from the panel.
^ Screw the removed panel to the custom panel (see
illustration).
^ Hook the panel into the bottom. Make sure the seal is
seated correctly.
^ Replace and slightly tighten the screws on the inside of the
drawer front.
^ Align the front.
^ Tighten the screws on the inside of the drawer front.
^ Replace the control panel, use caution with the power cord.
^ Replace and tighten the screws on to the left and right side
of the drawer front.
Installation
35