Tcp/ip settings, Opening the tcp/ip setting menu display – Muratec F-520 User Manual

Page 9

Advertising
background image

2-2

Network settings

TCP/IP settings

This machine uses TCP/IP protocol to communicate over the LAN, meaning the

TCP/IP settings described in this guide must be registered prior to using the

machine on the LAN.

NOTE: Contact your network administrator if you are unsure about these settings.

IMPORTANT: In order to activate new settings, the machine must be rebooted after the new

settings have been entered. Turn the machine “Off” and after three or more

seconds, turn the machine back “On”.

Opening the TCP/IP setting menu display

1

Press [Setting] on the control panel.

2

Press [Management].

3

Press [Network Settings].

Advertising