Maxim Integrated USBTO232 - Manual (Page 3)

USBTO232
USB-to-COM Port Adapter Board User Guide
_______________________________________________________________________________________ 3
Windows XP USB Driver Installation
1) Once the USBTO232 board is connected to the PC
for the first time in Windows XP, a Found New
Hardware Wizard | Welcome window appears, as
shown in Figure 1. Choose the No, not this time
selection and press the Next button to get started. If
you do not see a window that is similar to the one
described above after 30 seconds, remove the USB
cable from the USBTO232 board and reconnect it.
Administrator privileges are required to install the USB
device driver on Windows 2000/XP.
Figure 1. Windows XP: Found New Hardware Wizard |Welcome Window