Miele H 4044 BM - Manual (Page 27)

Combi functions
Combination Bake,
Combination Broil, Micro Broil
^ Select the desired function.
The oven specifies a "Default" power
level, "
HI". You may also select a lower
power level, "
LO".
H I
_
V
^ To select a lower power level, while
the triangle
V is flashing, use V to
change the setting.
^ Confirm the setting by pressing "OK",
or simply wait a few seconds.
The following appears in the display:
0:00
h
T
V
^ While the triangle V is flashing, use
the temperature selector or the
V or
W touch controls to enter the desired
duration in minutes:seconds (e.g.,
1:30 minutes).
Depending on the power level selected,
you can enter a time of up to 2 hours.
Confirm the setting by pressing "OK", or
simply wait a few seconds.
The following appears in the display:
I:30
h
_ 6 m T
Start
V
If the desired temperature does not
correspond to the default temperature:
^ Use the temperature selector to set
the desired temperature (except with
the Micro Broil function).
The following appears in the display:
I:30
h
_ 6 m T
Start
V
^ Select "OK" to start the function.
The countdown of the duration will
being in the display.
At the end of the combi function:
– the oven heating automatically turns
off.
– the cooling fan continues to run.
– the
T symbol flashes.
– if the signal tone is switched on, a
signal will sound (see "Settings
%").
^ Turn the function selector to "0".
All signals turn off.
Using the oven
27