Master Appliance HG Series - Manual (Page 2)

MASTER HEAT GUN ®
Heavy Duty Industrial Quality Multiple Use Heat Gun
Wherever reliable flameless heat is required, the MASTER HEAT
GUN
® does the job faster, safer and better.
High temperature industrial jobs are done faster with the MASTER
HEAT GUN because of its higher power and air flow ratings.
Power ratings go up to 1000°F/540°C at 1740 watts (120V).
Air flow ratings are 23 CFM (651L/Min) average air volume.
The combination of these factors means high performance.
MASTER HEAT GUN provides a fast flow of heated air for
many applications.
Renovation Flooring Roofing Laboratory
Four HG models provide temperatures up to 300°F/150°C, 500°F/260°C, 750°F/400°C, 1000°F/538°C
• Activate adhesives and
potting compounds
• Bend and form plastics and
plastic laminates
• Cure and set adhesives
• Defrost freezers and frozen
coils
• Dry conformal coatings on
circuit boards
• General heating and drying
applications
Automotive Shrink Wrap Bend PVC Heat pipes and more
• Melt solder off the backs
of printed circuit boards so
thru hole components can
be removed
• PVC bendings
• Preheat flux
• Remove dents in
fiberglass
• Remove plastic autobody
panels
• Remove windshield
caulking
• Shrink and terminate
environmental splices
• Shrink and terminate heat
shrinkable insulated solder
preforms
• Shrink heat shrinkable
anti-static film
• Shrink heat shrinkable
molded parts
• Shrink heavy gauge shrink
packaging
• Shrink wide heavy-wall
and adhesive-lined tubing
• Spot dry paint fast
• Stretch vinyls
• Strip paint
• Thaw frozen pipes
• Hundreds of other uses
www.masterappliance.com
MASTER HEAT GUN
The number one choice of industry with rugged die-cast aluminum housing and powerful universal motor.