Marathon Computer Vertical Recycler Baler V-4224 - Manual (Page 28)

These instructions are not intended as a substitute for training and
experience in proper use, safety procedures, maintenance, or installation
of this equipment.
Marathon does not assume responsibility for the installation
procedures of this equipment. Conformance to applicable local,
state, and federal laws concerning installation rests with the
customer.
3 INSTALLATION
GENERAL INSTALLATION
CAUTION:
DECALS
Installation of the baler is not complete until an inspection of the warning
decals has been made. Decals should be clearly visible, legible, securely
applied, and in the proper location. For decal description and location, see
DECALS and DECAL PLACEMENT in Section 1, pages 10 & 11.
3-1
DANGER: DO NOT CLIMB ON SIDES OF BALER. USE A LADDER OR
WORK PLATFORM WHEN WORKING ON TO P OF THE BALER OR
OTHER AREAS OF THE BALER THAT CAN NOT BE REACHED FROM
GROUND LEVEL.
WA R N I N G : PA RTS OF THE FEED GATE WILL EXTEND ABOVE T H E
TOP OF THE BALER WHEN THE FEED GATE IS FULLY RAISED.
This baler is designed for INDOOR USE ONLY.
Review this manual before beginning the installation. Study the
jobsite and installation requirements carefully to be certain all
necessary safeguards and/or safety devices are provided to protect
all personnel and equipment during the installation and as a
completed system.