Marantz SA8001 - Manual (Page 15)

12
ENGLISH
ABOUT THE TEXT INFORMATION
DISPLAY
The following items of text information in Super Audio
CD discs can be displayed by pressing
TEXT button
on the remote.
Never theless, which items of information are
recorded depends on discs so some information may
not be displayed. This unit skips unrecorded
information to display.
• During playback
When TEXT button is pressed on the remote, “Track
Title” of the currently playing will be displayed.
• In Stop Mode
Each time TEXT button on the remote is pressed,
text information will be displayed in the following
order.
• This unit can display 12 characters in one time. If
information is longer than 12 characters, the
display will scroll right to left.
• This unit can display only alphabets, numeric
numbers and symbols. Chinese and Japanese
characters cannot be displayed. If information is
in Chinese and Japanese characters, the unit
displays nothing.
Time Display
Album Title
Album Artist
TIMER PLAY
This unit can perform timer play by cooperating with
your audio timer.
Connect this unit’s power cord to the audio timer’s
power socket and the timer’s power cord to power
outlet.
* For connection to audio timer and it’s operation,
please refer to the instruction manual of your audio
timer.
AC IN AC IN
Setting method of Timer Play
q Press POWER switch to turn ON the power.
w Insert the disc to be played.
* In timer play mode, tracks are played normally.
e Set the audio timer.
Audio Timer
TROUBLE SHOOTING
If you think a malfunction has occurred, first check
the points listed below. The problem is likely to have
been caused by a simple operational error or a
connection problem. If the problem cannot be
corrected even after carrying out the following checks,
consult your dealer or nearest Marantz sales office
or service counter.
• The disc fails to rotate.
1. Is the mains lead plugged in properly?
2. Is the POWER switch ON?
3. Is the disc placed in the correct position on the
disc tray?
4. Is the disc placed properly with the label side
facing up?
5. Is the disc dirty?
6. Is the disc scratched?
7. Is the disc warped?
• The disc is rotating but no sound is heard.
1. Are the amplifier and speakers connected
properly?
2. Is the amplifier switch ON?
3. Is the amplifier’s function or selector switch set to
“CD” or “AUX” or such (to whatever you have
connected this unit to)?
4. Is the amplifier’s volume control set at the
minimum level?
• The disc stops in mid-operation.
The sound drops out or noise is heard.
1. Is the disc dirty?
2. Is the disc scratched?
3. Is the disc warped?
* In the case of a CD-R or CD-RW disc, this problem
may occur when the conditions under which its data
was originally written were substandard or when
the quality of the disc itself is poor.
* This condition may occur in Mixed-Mode CDs, CD
Extra, and other discs that have CDDA format mixed
with other data.
Noise may also be heard momentarily when
skipping tracks.
• Remote control operation is not possible.
1. Is the transmitter of the remote control unit
(RC8001SA) pointed correctly at the remote
sensor on the front of the player (this unit)?
Or is there an obstruction between the transmitter
and the remote sensor?
2. Are the batteries in the remote control unit
exhausted?
3. Is there another strong light (from a window, etc.)
striking the Super Audio CD player’s remote
sensor?
• A Super Audio CD cannot be played.
1. Is the disc scratched, dirty or warped?
2. Is the amplifier’s input selector set to digital?
* Digital audio signal will not be output when a Super
Audio CD is played.
3. Is the disc a Super Audio CD multi-channel only
disc? (This unit does not support Super Audio
CD multi-channel.)
• A CD-R/CD-RW disc cannot be played.
1. Is the disc placed upside down?
2. Is the disc contains properly written TOC?
3. Is the recorded information in an audio (CD-DA)
format?
• A specific CD cannot be played
Copy control CDs (CDs with copy guard) are
special discs that do not comply with current CD
standards. Marantz cannot guarantee the ability
to play such discs on your CD player.
When normal CDs can be played without a
problem and problems occur only when playing
these special discs, it is not a problem with this
unit.
Please ask the seller of the copy control CD for
detailed information regarding copy control CDs.
• The unit makes a clicking sound when the tray
closes
This is the adhesion click of the clamper for
securing the disc. This does not cause any
problem in using the unit.
• While the disc is spinning, a spinning sound
is heard or a slight vibration occur.
Depending on the disc, a spinning sound may
occur or the unit may vibrate slightly due to disc
eccentricity or such. This is not a problem with
this unit.