Monte Carlo Fan Company 4CO28 - Manual (Page 4)

Place blade holders onto blades aligning holes
in blade holder with holes in blade. Make sure
that the side of the blade you select is facing
downward. Install 3 screws and fiber wash-
ers to back side of blade as shown. Tighten
screws securely. Repeat this process 3 more
times until all blades are assembled.
Install blades to motor using the 8
motor screws provided. Tighten
screws securely.
20 21
Lift fan to mounting bracket, aligning the “L”
shape holes with the scresws on the mount-
ing bracket. Turn the fan clockwise to lock
in position. Re-install the screws removed in
the previous step and tighten securely.
19
Install switch cap to fan using the 3
screws provided. Tighten securely.
22