MSI P43 - Manual (Page 59)

3-21
BIOS Setup
Intel EIST
The Enhanced Intel SpeedStep technology allows you to set the performance level of
the microprocessor whether the computer is running on battery or AC power. This
field will appear after you installed the CPU which support speedstep technology.
Adjust CPU FSB Frequency (M Hz)
This item allows you to set the CPU FSB frequency (in MHz). This item will disappear
after you set the
Adjusted CPU FSB Frequency (MHz)
It shows the adjusted CPU frequency (FSB x Ratio). Read-only.
Advance DRAM Configuration
Press <Enter> to enter the sub-menu and the following screen appears.
Configure DRAM Timing by SPD
Setting to [Enabled] enables DRAM CAS# Latency automatically to be determined
by BIOS based on the configurations on the SPD (Serial Presence Detect) EEPROM
on the DRAM module.
MEMORY-Z
Press <Enter> to enter the sub-menu and the following screen appears.
Important
Even though the Dynamic Overclocking Technology is more stable than
manual overclocking, basically, it is still risky. We suggest user to make
sure that your CPU / memory modules can afford to overclocking regularly
first. If you find the PC appears to be unstable or reboot incidentally, it's
better to dis able the D y namic O v erc loc k ing or to low er the lev el of
overclocking options. By the way, if you need to conduct overclocking
manually, you also need to disable the Dynamic OverClocking first.
PDF created with pdfFactory Pro trial version www.pdffactory.com