Motorola 68014301013 - Manual (Page 8)

6 Installation
The UIM can be mounted in two different configurations:
• directly on a flat spot within easy reach of the driver
using the supplied mounting tape
• using the supplied mounting bracket.
Caution: Do not mount in a location that obstructs driver’s
vision or interferes with operation of the vehicle.
For optimal adhesion to the vehicle dashboard:
• Ensure the adhesive and the dashboard surface are
warm (temperature above 15º C). For better adhesion in
cold conditions, ensure the vehicle interior and adhesive
are heated for 30 minutes before applying the adhesive,
and 30 minutes after applying the adhesive.
• Prepare the dash surface with an appropriate adhesion
promoter. Test the cleaner on a small, inconspicuous
area of the mounting surface to ensure it does not
result in blemishing. The surface must be completely
dry before moving to the next step.
• Position and install the mount with the supplied
adhesive.
• Optimal curing time at room temperature is 24 hours,
and in cold conditions the adhesive needs 48 hours to
properly cure.
Direct to flat surface
To install the UIM directly on a flat service:
Note: It is recommended to install the UIM directly on a flat
surface as a curved surface can cause difficulties in pushing
the buttons, and can cause the UIM to come loose.
Caution: The location of the UIM must not interfere with
the vehicle's air bag deployment.
1 Clean mounting surface thoroughly with an alcohol
wipe (not supplied).
2 Select UIM orientation (controls on left or right of display).
Note: To change screen display orientation, see “Set
install preferences” on page 11.
optimal for
right-handed
operation
optimal for
left-handed
operation