Mercedes-Benz 2002 G-Class User Manual

Page 325

Advertising
background image

322

Jump starting

Technical

data

Instruments
and controls

Operation

Driving

Instrument

cluster display

Practical hints

Car care

Index

Jump starting terminals are located in the left side of the
engine compartment.

1

Cover

2

Positive (+) terminal (located under cover)

3

Negative (-) terminal

Proceed as follows:

1. Position the vehicle with the charged battery so that

the jumper cables will reach, but never let the
vehicles touch. Make sure the jumper cables do not
have loose or missing insulation.

2. On both vehicles:

Turn off engine and all lights and accessories,

except hazard warning flashers or work lights.

Apply parking brake and shift selector lever to

position “P”.

Important!

3. Clamp one end of the first jumper cable to the

positive (+) terminal of the discharged battery and
the other end to the positive (+) terminal of the
charged battery. Make sure the cable clamps do not
touch any other metal parts.

4. Clamp one end of the second jumper cable to the

grounded negative (–) terminal of the charged
battery and the final connection to the negative (–)
terminal of the discharged battery.

J_G463.book Seite 322 Mittwoch, 19. September 2001 8:06 08

Advertising
This manual is related to the following products: