Miele DG2661 - Manual (Page 47)

The right display shows the M symbol and a signal sounds.
Issue Fix
The steam generator is not engaged
correctly. Check if the steam generator is
inserted all the way by removing it and
inserting it again.
The water level is low. The water level must be between the
two marks.
After the start the right display shows k and a number between 1 - 10 or
the left display shows k .
Issue Fix
The unit needs to be descaled. See "Descale".
The right display shows an F with a number.
Issue Fix
F20: The oven does not heat. Check if the steam generator is
inserted all the way by removing it and
reinserting it.
Turn the steam oven off and on again.
If the fault occurs again, lightly
lubricate the connection valve of the
steam generator with silicone grease,
as described in "Cleaning and Care -
Connection valve".
If the problem persists, turn the
appliance off and call Technical Service.
Other fault messages Contact the Miele Technical Service
Department.
The door hinges squeak.
Issue Fix
Lubricate the door hinges with the supplied silicone grease.
Frequently asked questions
47