Manitowoc Ice S1470C User Manual

Page 2

Advertising
background image

MODEL - SY0684C or SD0672C
MODELS - SY1474C or SD1472C
1. Place the panel on a flat, horizontal surface with the

stainless steel side (exterior) facing up.

Note:

The screw hole on the face of the panel should be in the

lower right-hand corner when you are facing the panel, as
pictured below:

2. Make sure the white PVC film is removed from the front

panel.

3. Use the Alcohol Prep Pad found in the kit to gently clean

surface of stainless steel panel, focusing on the central
area highlighted below.

Models SY1474, SD1472

Models SY0684, SD0672


4. Find the large L-shaped template in the kit. Remove the

plastic static cling from the paper backing.

5. Carefully place the L-shaped static cling template in the

lower left-hand corner of the panel as shown in the
illustration below:

Note:

Verify template rests on the top edge of the bottom

molding and is aligned with left edge of the panel.

Models SY1474, SD1472

Models SY0684, SD0672




6. Examine the urethane logo. Notice that it is covered on one

side by white backing paper and on the other by a thinner semi-
transparent masking film. Peel back the solid, white backing
paper slowly, making sure the urethane logo remains attached
to the thinner semi-transparent masking film. This must be
done very carefully, as the logo has a tendency to remain
attached to the solid white backing paper, and the logo
itself could be divided into several pieces.

Verify the entire logo remains attached to the semi-transparent film
as you peel it back

7. Carefully place the semi-transparent film and logo within the

inside edges of the template, making sure the edges of the
film are flush with the inside edges of the template, as
illustrated below.

Note: Be sure that the logo is aligned properly. It is difficult to re-
adjust the logo once the adhesive makes contact with the stainless
steel.


Manitowoc Ice, Inc.

2110 South 26

th

Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA 000002851

Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879

Rev 01

Web Site - www.manitowocice.com 5/25/10

White paper

Semi-transparent film

Logo

Advertising
This manual is related to the following products: