Helpful hints – Philips Magnavox CCX133AT User Manual
Page 37
Setting Up the VCR Plus+ Programming System (cont’d) 37
2
Now, compare the channel numbers you have written in the VCR
PLUS+ CH. and CABLE/TV CH. columns. You’ll notice that some
stations have VCR Plus+ and Cable/TV channel numbers that are
the same, and other stations have channel numbers that do not
match. Where the channel numbers DO NOT match, you must
tell the TV/VCR the VCR Plus+ and Cable/TV channel numbers
according to the following steps.
●
Make each entry within 60 seconds of the previous entry.
6
Look at the lists you filled in on page 36. For stations whose
VCR Plus+ and Cable/TV channels do not match, press
the CHANNEL (Up/Down) buttons until the arrow is
beside the VCR Plus+ channel you need. Then, press the
Number buttons to enter the corresponding Cable/TV
channel from your list. (Enter a “0” before single-digit chan-
nels.) Continue this process until you have entered all the stations
on your list.
7
Press the STATUS/EXIT button to exit.
• To correct a Cable/TV channel num-
ber, repeat the steps on this page.
• To clear a Cable/TV channel number,
repeat steps 3-5 on this page. Then,
press the CHANNEL (Up/Down) but-
tons to select it. Then press the
CLEAR button. Press the
STATUS/EXIT button to exit.
• Always enter a “0” before single-
digit channels.
• To select line input for the Cable/TV
channel, press 0,0. A/V IN will
appear on-screen.
Helpful Hints
5
Press the Number 5 button to select VCR PLUS+ REF. MAP.
VCR PLUS+ CROSS REF. MAP
VCR PLUS+
CABLE/TV
124
– –
125
– –
01
– – – –
B
23
02
– –
03
– –
TO SELECT CH PRESS CH ▲/▼
TO DELETE PRESS CLEAR
TO END PRESS EXIT
VCR PLUS+ CROSS REF. MAP
VCR PLUS+
CABLE/TV
124
– –
125
– –
01
– – – –
B
– –
02
– –
03
– –
TO SELECT CH PRESS CH ▲/▼
THEN ENTER CH NO.
TO END PRESS EXIT
2
Examine the lists on
page 36.
4
Press the PLAY/▲ button or the STOP/▼ button to select
VCR SETUP, then press the F.FWD/+ button.
VCR SETUP
1 ONE TIME PLAY
[ON]
2 REPEAT PLAY
3 ON-SCREEN MODE
4 RECORD DEFEAT
[OFF]
5 VCR PLUS+ REF. MAP
TO SELECT PRESS NUMBER
TO END PRESS EXIT
3
Press the MENU button to display the pop up menu.
REW
PLAY
POWER
SPEED
MUTE
SLEEP
ALT.CH
CHANNEL
VOLUME
REC/OTR
STATUS/EXIT
MEMORY
PAUSE/STILL
MENU
CLEAR
VCR PLUS+
SMART
SOUND
STOP
F.FWD
–
+
o
o
p
p
o
p
1
2
3
4
5
6
7
8
9
0
+100
3
4
5
6
7