Miele CVA 2660 - Manual (Page 55)

^ Lift the magazine runners up at the front a little (1), and
then pull them out completely (2).
^ Clean the capsule magazine and magazine runners with
hot water and a little washing-up liquid, or in the
dishwasher, and dry with a cloth.
^ Also clean the area under the magazine runners. It is
particularly important to clean the sensor which is used to
recognise the capsule chambers as well as the recess in
the floor. Wipe everything dry with a soft cloth.
^ To put the magazine runners back in, place them on the
guide rails and push them into the machine until they click
into position.
^ Insert the capsule magazine. You do not have to position it
in a particular way, as the machine will automatically guide
it into position.
^ Push the magazine runners with the capsule magazine fully
back into the machine.
Cleaning and care
55