Memorex MP3134BLU - Manual (Page 13)

OPERATION (CONTINUED)
12
NOTES ON PROGRAMMED PLAY:
• Programming is the ability to preselect the order in which a series of tracks
will be played.
• Each track may be stored in the program memory as many times as desired.
• As each track is played, its track number will be displayed. You can move for-
ward or backward through the programmed tracks with the Skip/Search o or
n
button.
• The CD player will stop after all programmed tracks have been played or the
STOP (■) button is pressed.
• The Program memory will be cleared when the unit is turned off or changed
to another mode or when the CD door is opened.
• To check the program, while in the Stop mode, press the PROGRAM button
once, "01" will blink in the display, then the first selected track will blink in the
display. Press the PROGRAM button again, "02" will blink in the display, then
the second selected track will blink in the display. Press the PROGRAM but-
ton repeatedly to check the other programmed tracks.
It is also possible to use the Program and
Repeat functions together to repeat a
specific program indefinitely. First,
program the tracks you wish to hear in the
order you wish to hear them, as described
on page 11. Then, press the REPEAT
button twice. The PROGRAM indicator
will blink and the REPEAT indicator will
light.
2
1
1
Press the PLAY/PAUSE (
®
/p ) button
to begin programmed repeat
playback; both the PROGRAM and
REPEAT indicators will light. The
player will play the tracks you
selected in the order in which you
programmed them. When the last
track in the program has been played,
the entire program will begin again.
2 1
2
PROGRAMMED REPEAT
NOTE:
Program Repeat operation will continue indefinitely until you press the STOP (■)
button.