Motion Computing J3400 MDC001 - Manual (Page 41)

English 41
Note: To determine which regulatory and safety marks apply to a specific
product, component, or accessory, check the product label affixed to the
product or its component.
Federal Communications Commission notice (USA)
Electromagnetic Interference (EMI) is any electromagnetic disturbance that
interrupts, obstructs, or otherwise degrades or limits the effective
performance of electronics or electrical equipment. These emissions can
potentially disrupt, degrade, or otherwise interfere with authorized electronic
emissions, which may include television, AM/FM broadcasts, cellular services,
radar, air-traffic control, and pagers.
The FCC Rules and Regulations have established Radio Frequency (RF)
emission limits to provide an interference-free RF spectrum. Many electronic
devices, including computers, generate RF energy incidental to their
intended function and are, therefore, covered by these rules.
Your Motion TCD001 Docking station, and all accessories meet the regulatory
agency limits for Electromagnetic Compatibility (EMC). EMC is the ability of
electronic devices, including computers, to function properly together in the
electronic environment. However, there is no guarantee that in a specific
installation it will not cause interference. Should this equipment cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, you are encouraged to try
to correct the interference by one or more of the following measures:
• Reorient the receiving antenna.
• Relocate the Tablet PC and the receiver.
• Separate the Tablet PC and the receiver.
• Plug the Tablet PC and receiver into different circuits.
You may also need to contact a radio/television technician for assistance.
Unintentional emitter per FCC part 15
The rating label on Motion Tablet PCs, Docking stations and all accessories
show which class (A or B) these devices fall into. Class B devices have an FCC
logo (shown on page 41) or FCC ID on the label. Class A devices do not have
an FCC ID on the label. Once you determine the class of the device, refer to
the following corresponding statement and to the FCC notices in this Safety
and Regulatory Guide.
• Class A is for business or industrial environments.
• Class B is for residential environments.