Minolta Dynax 5 9222-2163-11 - Manual (Page 13)

Press the back-cover release
to open the back cover and
remove the film, then close
the back cover.
25
Wait until the film is
completely rewound.
• will appear and will blink on
the data panel, indicating it is safe to
open the back-cover.
• The film-chamber lock indicator is
blank after the film is rewound.
FILM
Rewinding the Film
Custom Function Notes
Cust-2: Automatic (1) or manually initiated (2) rewind start (p.108).
Cust-3: Rewind the leader into the cartridge (1) or leave the leader out (2)
(p.109).
Manual Rewind
Gently press the manual-
rewind button using a pen.
• Only use blunt objects. Sharp
objects may damage the camera.
• will appear and will blink on
the data panel when the film has
rewound.
1
2
Use manual rewind to rewind the film before the roll is finished.
After you have exposed the last frame, the camera will automatically
rewind the film.
FULLY-AUTOMATIC
OPERATION
Use full-auto when you are just starting out or when
shooting under conditions that would require you to
constantly adjust the focus or exposure.
• Do not turn the focusing ring when the film is rewinding.
• Although more pictures than specified on the film package may be taken,
the film processor may not print more than the number specified on the
film cartridge.
24
Program-reset button (p.30)
9222-2163-11 MM-B108 (E).qxd 01.8.3 16:11 Page 24