MITSUBISHI ELECTRIC WD-57831 - Manual (Page 45)

Chapter 3. TV Setup 45
Additional Setup Using the
NetCommand Menu, continued
IMPORTANT
All audio from what you are watching on
the TV is always available as an output on
both the TV’s AUDIO OUT LEFT/RIGHT and
DIGITAL AUDIO OUT jacks.
To use the surround sound capabilities of your
A/V receiver however, you must connect your
DVD player, satellite receiver, or cable box
directly to the A/V receiver, as surround sound
may not be available from the TV’s audio output.
Automatic A/V Receiver Switching, Part 1: Learn IR
Codes for A/V Receiver Inputs
1. Connect your A/V receiver to the TV and DVD player.
See chapter 2, “TV Connections,” for suggestions.
2. Open the NetCommand menu.
3. Highlight the
Learn button under AV RECEIVER
SETUP and press ENTER to display the AV Receiver
(AVR) Learn screen. See figure 15.
When the AV Receiver Learn screen opens, the
highlight is on the check box for
Input 1. The terms
Input 1–Input 4 are generic references to the A/V
receiver inputs for which the TV can learn IR codes.
4. In this example, the IR code for the A/V receiver’s TV
Audio input will be “learned” as Input 1.
Press
ENTER on the TV’s remote control and while the
text Input 1 is flashing, press and hold the TV INPUT key
on the A/V receiver’s remote control.
5. When a check appears in the check box, release the
TV INPUT key.
6. Press to highlight the text box for Input 1. To enter
a name:
• Use on the TV’s remote control to select a
character.
• Press ENTER to set the letter and move the highlight
to the next letter.
57
*ODPNJOH

$PBYJBM

$BCMF
"7
3FDFJWFS
%7%
BVEJP

JOQVU
57
BVEJP

JOQVU
EJHJUBM
PS

BOBMPH
BVEJP

GSPN
57
57
BVEJP
PVU
%7%
1MBZFS
XJUI

%JHJUBM
4VSSPVOE
4PVOE
WJ
E
FP
7$3
XJUI

"OBMPH
"VEJP
WJ
E
FP
BO
BM
PH

B
VE
JP
*&&&


%FWJDF
BV
EJ
P



WJ
EF
P
57

B
VE
JP

P
VU
BV
EJ
P



WJ
EF
P
.FNPSZ
$BSET
EJ
HJ
UB
M
T
VS
SP
VO
E

TP
VO
E
Figure 14. Overview of A/V receiver connections described
• To delete a letter, highlight it and press CANCEL
or press to insert a blank space (underscore
character).
• To return the highlight to the first character,
repeatedly press CANCEL.
• To return to the default name, highlight the first
character and press CANCEL.
A/V
Receiver
Audio Inputs
Text boxes for you to
enter the name of the associated
audio input on the A/V receiver
A/V receiver com-
mands the TV can
send when “learned”
Figure 15. The AV Receiver (AVR) Learn screen lets you
set up NetCommand control of your A/V receiver.
7. Press to highlight the check box for
Input 2. In
this example, the IR code for the A/V receiver’s DVD
Audio input will be “learned” as Input 2.
8. Press ENTER on the TV’s remote control and while the
text Input 2 is flashing, press and hold the DVD INPUT key
on the A/V receiver’s remote control.
9. When a check appears in the check box, release the
DVD INPUT key.
10. Press to highlight the text box for Input 2. Enter
the name DVD. Use to enter the name DVD.
Press ENTER to set each letter.
Figure 16. Assign names to
identify “learned” A/V receiver
audio inputs
11. Repeat steps 7 through 10 for any additional A/V
receiver inputs connected to other devices.
12. Press EXIT to close all menus.
Automatic A/V Receiver Switching, Part 2: Tell the TV
Where Connected Devices Send Audio
• You can assign each A/V receiver input to only one device.
• Most devices are typically set up like the VCR in this
example, in which analog audio from the device is sent
through the TV and the input setting is left at the default
setting
None.
Analog Stereo Audio (e.g., analog VCR with audio con-
nected only to the TV: see figure 17)
1. Press
INPUT to display the Input Selection menu.
2. Highlight the icon for the VCR and press ENTER to switch
to the VCR input.
3. Press MENU and open the NetCommand menu.