Installation, Securing the support bars, Securing the support brackets – Miele KM 406 User Manual

Page 10

Advertising
background image

Securing the support bars

Wood or Corian countertops

^ Arrange the bars, b, as shown in the

illustration.

^ Drill

1

/

16

" (1.5 mm) pilot holes through

the brackets and secure them using
the supplied screws.

^ Fill the gap, c, between the bars and

the countertop using the supplied
silicon sealant.

Granite countertops

For granite countertops, the support
bars, b, can be secured with double
sided tape or construction adhesive.
Do not allow the bars to "float", they
must be securely fastened. Fill the gap,
c, between the bars and the
countertop using the supplied silicon
sealant.

The screws are not necessary for
granite countertops.

Securing the support brackets

^ Place the brackets, a, as shown in

the illustration.

^ Drill two

1

/

16

" (1.5 mm) pilot holes for

each bracket and secure them using
the supplied screws.

Granite countertops

A granite countertop must be
prepared with a hole drilled at the
position indicated, d, to secure
each support bracket (see
illustration).

Using a piece of double sided tape or
construction adhesive press the
support brackets supplied, a, into the
position indicated in the illustration,
flush with the top edge of the
countertop. Secure each bracket with
one screw.

Installation

10

c

d

Advertising
This manual is related to the following products: