Metz Plasma-TV-Set - Manual (Page 99)

99
Before executing a DVB station search, you must
make the appropriate search settings.
Depending on the features installed in the TV set
and your personal requirements, you can make
the following settings:
All = search for all stations on the selected satelli-
te.
FTA only = search only for unencrypted (free-to-
air) stations on the selected satellite.
FTA (CI) = search for all FTA stations and stations
which can be received with the CI
module.
The menu item "FTA (CI)" is available
only if a CI module has been installed
and a CA module is plugged into it.
Making the search settings
• Press the MENU key to open the TV
menu.
• Press the red key to open the menu
"Configuration".
• Press the appropriate numeric key (in
this example ᕥto select "DVB-S".
• Press the appropriate numeric key (in
this example ᕧ to select "Search set-
tings".
• Use the - + key to select the desired setting.
• Press the Ok key to confirm the new setting.
• Press the EXIT key to close the TV menu.
A2. Setting the stations
Search settings
Calling the menu
MENU
ᕥ
ᕧ
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
OK
EXIT
General settings
Manuall search
Automatic search
Search settings
Satellite D
Satellite C
Satellite B
Astra 1
DiSEqC system
LNB supply voltage
Function for F2
Function for F1
EURO sockets
DVB-C
DVB-T
DVB-S
Analog-TV
Country
Language
Operating
Stations Free-to-air only
Change with
Accept value with
F1 ➔
OK
– +
605 47 2029.A2 LCD-GB 10.03.2006 8:53 Uhr Seite 99