Motorola i700plus - Manual (Page 66)

66
www.mot.com/iDEN
Safety and General Information
For the safe and efficient operation of your radio, observe
these guidelines:
Your radio product contains a transmitter and a receiver. When it is ON, it
receives and transmits radio frequency (RF) energy. The radio operates in the
frequency range of 806 MHz to 870
MHz and employs digital modulation
techniques. When you communicate with your radio product, the system
handling your call controls the power level at which your radio product
transmits. The output power level typically may vary over a range from 0.00024
watts to 0.6 watts.
Exposure To Radio Frequency Energy
Your Motorola Radio Product is designed to comply with the following national
and international standards and guidelines regarding exposure of human beings
to radio frequency electromagnetic energy:
•
United States Federal Communications Commission, Code of Federal
Regulations; 47 CFR part 2 sub-part J
• American National Standards Institute (ANSI) IEEE. C95. 1-1992
• National Council on Radiation Protection and Measurements (NCRP).
Report 86
• International Commission on Non-Ionizing Radiation Protection (ICNIRP)
1998
• National Radiological Protection Board of the United Kingdom,
GS 11, 1988
• Verband Deutscher Elektrotechniker (VDE) DIN-0848
• Department of Health and Welfare Canada. Safety Code 6
To assure optimal radio product performance and make sure human exposure to
radio frequency electromagnetic energy is within the guidelines set forth in the
above standards, always adhere to the following procedures:
When placing or receiving a phone call, or using the group and private call
functions with a Group/Private Speaker OFF (muted speaker icon visible in the
display), hold your radio product as you would a telephone. Speak directly into
the microphone and position the antenna up and over your shoulder.
IMPORTANT INFORMATION ON SAFE AND
EFFICIENT OPERATION.
READ THIS INFORMATION BEFORE USING
YOUR INTEGRATED MULTI-SERVICE
PORTABLE RADIO.