Miele DA5341D - Manual (Page 18)

Cleaning the grease filters
^ By hand: use a scrub brush with a
solution of warm water and mild
detergent.
Do not use the pure detergent,
aggressive all purpose cleaners,
oven sprays, abrasive cleaning
agents or limescale removers. They
could destroy the filter.
^ In a dishwasher: place the filter
vertically in the lower basket, making
sure that the spray arm is not
blocked.
Use a wash program with a max.
temperature of 150°F (65°C). In a
Miele dishwasher use the "Normal"
program.
Use the recommended amount of
dishwasher detergent. Overuse could
destroy the filter.
Depending on the detergent,
cleaning the grease filter in a
dishwasher may cause permanent
discoloration of the filter surface.
Performance of the filter will not be
affected by this discoloration.
^ After cleaning, the filters can be
placed on a towel to air dry.
^ While the filters are removed, clean
any dirt or grease from the interior
casing to prevent the risk of fire.
^ When putting the grease filter back
make sure that the locking clip is
facing the cooking surface.
^ If the filter is incorrectly installed,
insert a small screwdriver into the slit
along its edge to disengage it from
the casing.
After cleaning and returning the grease
filters the timer must be reset.
^ While the fan is on, press and hold
the grease filter control until only the
first "-/+" indicator is flashing.
^ The second grease filters must also
be reset in the same way, even if the
timer has not yet reached its
maximum.
Cleaning and care
18