Mitel T7208 - Manual (Page 16)

-12-
Call Forward
Call Forward lets you redirect incoming calls to an alternate number. Always
redirects all incoming calls regardless of the state of your phone. B-Int
redirects internal calls when your phone is busy, and B-Ext redirects external
calls when your phone is busy. NA-Int redirects internal calls after several
rings if you don't answer, and NA-Ext redirects external calls after several
rings if you don't answer.
Note: For information about "I Am Here?", see Call Forward - Remote.
To program Call Forward:
1. Press .
2. Press # (No) until "Call Forwarding?" appears.
3. Press * (Yes).
4. Press # (Next) until the desired type of Call Forward appears (see
above).
5. Press * (Review).
6. Press * (Program).
7. Dial the destination number.
8. Press DOWN ARROW to save.
9. Press
.
To turn Call Forward on and off (once it has been programmed):
1. Press .
2. Press # (No) until "Call Forwarding?" appears.
3. Press * (Yes).
4. Press # (Next) until the desired type of Call Forward appears.
5. Press * (Review).
6. Press * (Change).
7. Do one of the following:
„
To turn Call Forward on, press # (TurnOn).
„
To turn Call Forward off, press # (TurnOff.
8. Press .