Mantis DOUBLE EDGED DEHT19 - Manual (Page 4)

WARNING DANGER
IF TRIMMER IS USED IMPROPERLY OR SAFETY PRECAUTIONS ARE NOT FOLLOWED,
THE USER RISKS SERIOUS INJURY TO THEMSELVES AND OTHERS.
READ AND UNDERSTAND THE RULES FOR SAFE OPERATION AND ALL
INSTRUCTIONS IN THIS MANUAL.
A. S AFETY D ECALS AND M OLDED S YMBOLS
Important parts of the safety system incorporated in
Double Edge trimmers are the warning and
informational decals and molded-in symbols found on
various parts of the trimmer. These decals must be
replaced in time due to abrasion, etc.
It is your responsibility to replace the decals or molded
housing when they become hard to read. The locations
of these safety features are shown below. See page 11
for their part numbers when ordering replacements.
4
B. S AFETY S YMBOLS I DENTIFICATION
Double Edge Trimmer
Loop Handle
Guard
On/Off Switch
On/Off
Switch
Safety Symbols
(Molded into Part No. 310400 Main Housing Set}
Rear Handle
WHAT THE SYMBOLS MEAN:
1. Read the instructions.
2. Do not expose to rain.
3. Remove plug from main (electric
power source) immediately if cable is
damaged or cut.
4. Double insulated.
1 2 3 4
WARNING DANGER
TO REDUCE THE POTENTIAL FOR
ACCIDENTS, COMPLY WITH THE
SAFETY INSTRUCTIONS IN THIS
MANUAL. FAILURE TO COMPLY MAY
RESULT IN SERIOUS PERSONAL
INJURY AND OR EQUIPMENT AND
PROPERTY DAMAGE.
WARNING DANGER
THIS SYMBOL POINTS OUT
IMPORTANT SAFETY INSTRUCTIONS.
WHEN YOU SEE THIS SYMBOL,
HEED IT’S WARNING!!
STAY ALERT!!
! !
!
! !
!
!
! !
310706 Electric Trimmer EN_310700 Electric Trimmer.qxd 7/28/10 3:01 PM Page 4