Majestic Appliances ODGSR36A - Manual (Page 9)

9
ODGSR Series Outdoor Gas Fireplace
20007114
Operating Instructions
Log Installation
1. Remove logs from the packaging.
As with all plastic, these bags
are not toys and should always
be kept away from children and
infants.
2. Place left rear log on rear log support.
Ensure that log is firmly positioned and
there is no side-to-side movement. (Figs.
13 & 14)
3. Carefully place Ember Log between
grate and burner. (Figs. 13 & 14)
4. Place the front of right rear log on the
burner and the back of the log on the
rear log support.
5. Place the top logs onto the locator
notches. Ensure the logs are secure.
(Fig. 13 & 14)
First Firing
Upon completing the gas line connection, a small
amount of air will be trapped in the line. When
first lighting the unit with pilot light, it will take a
few minutes to purge the trapped air. Once purg-
ing is complete, the pilot and burner will light and
operate as indicated in the instruction manual.
Subsequent lightings of the appliance will not
require purging.
When lit for the first time, the appliance will emit
a slight odor for an hour or two. This is due to
paint and lubricants used in the manufacturing
process. After each lighting, vapor may con-
dense and fog the glass; this moisture disap-
pears in a few minutes of burning.
LG317
UVODSR36
logs
11/24/03 djt
Right Cross
Log
Left Cross
Log
Left Rear
Log
Right Rear
Log
Ember
Log
LG317
Fig. 13 ODGSR36 log placement.