Micron Technology Transport LT - Manual (Page 57)

Resolution and Color Depth Video Features and Configuration
57
5. Click the Change button. The Update Device Driver Wizard window appears.
6. Click the Next button.
7. Select Display a list of all the drivers in a specific location , so you can
select the driver you want. Click the Next button.
8. Click the Have disk button. If the driver is on a floppy disk insert it into the
floppy drive. Click the Browse button and locate the driver you want to install.
Click the OK button.
9. Select the new driver in the Select Device screen and click the OK button.
10.Click the Next button to install the new driver and follow any directions on the
screen to finish setting the display properties.
Windows NT 4.0: 1. Log on to the computer as supervisor. The Invalid Display Settings window
may appear.
2. Click on the Start button and the Start Menu appears.
3. Select Settings and click on Control Panel, double click on Display . The
Display Properties window appears.
4. Select the Settings menu.
5. Click the Display Type button. The Display Type window appears.
6. Click the Change button. The Change Display window appears.
7. Click the Have disk button. If the driver is on a floppy disk insert it into the
floppy drive or if you want to use the original factory driver, insert the Restore
CD-ROM into the CD-ROM drive. Enter the path to the directory where the
drivers are located or click the Browse button and locate driver you want to
install. Click the OK button.
Figure 20. Enter location of the driver files