Miele CVA 2650 - Manual (Page 12)

Before using the coffee system
for the first time
1. Clean the parts
^ Hand wash the coffee capsule plate
with hot water and liquid dish soap.
^ The water tank can be washed in the
dishwasher.
2. Fill the water tank
^ Open the appliance door.
^ Lift the water tank and pull it out.
^ Fill the container with fresh, cold tap
water to the "Max." mark. Push the
water tank back into the machine.
3. Fill the system with water
HOT WATER
K1 2 3 4 5 L o n G k
C
^ Set a cup under the steam valve.
^ Turn the left jog shuttle to "Hot water".
^ Press the right jog shuttle.
The steam valve dispenses hot water.
^ Press the right jog shuttle again to
turn the hot water off.
^ Turn the left jog shuttle to "Heating
with steam".
^ Press the steam lever down.
^ Push the steam lever up when steam
starts to be dispensed.
The lines are filled and the coffee
system is ready to use.
4. Rinse the lines
RINSE
K1 2 3 4 5 L o n G k
C
^ Turn the left jog shuttle to "Rinse".
^ Press the right jog shuttle.
Water runs from the coffee dispenser.
^ Press the steam lever down.
Water runs from the steam valve.
^ Push the steam lever up after a few
seconds.
First steps to use
12