Motorola F5207A - Manual (Page 13)

13
Resume
If the device is in Standby mode, the following methods will resume it:
• Ring Indicator from a serial port
• USB bus activity
• An input from the keyboard
• Changing a touch pad position
• A contact to the touch panel of the MW800 display
• Pressing the Emergency key of the MW800 display
• Pressing the Function key of the MW800 display
• LAN (Wake on LAN message)
• Power button (if configured)
If the CPU box configuration allows wake up from a serial port (see section 3, Radio
ring indicator (RI) setting is ENABLE, System ring indicator (RI) mask setting is
DISABLE), the CPU will resume when a device connected to a serial port activates
the RI line.
A USB device can wake the CPU out of standby if its setting specifies the operating
system to do so. To enable this feature, Allow this device to bring the computer
out of standby option (Power Management tab in Properties) should be selected.
For details about this option, refer to the help file attached to the Properties of the
device.
A Network (Ethernet) device can resume the CPU from standby if its setting
specifies the operating system to do so. To enable this feature, Allow this device to
bring the computer out of standby option (Power Management tab in
Properties) should be selected. For details about this option, refer to the help file
attached to the Properties of the device.
Pressing of the Power button will bring the computer out of standby if its setting
specifies the operating system to do so. For details about this option, refer to the help
file attached to Power Options (Start -> Settings -> Control Panel -> Power
Options).
Resetting
You may have to reset the CPU when an error occurs and the program you are using
locks up. Be aware that the system may have been processing data when it locked up.
If you are sure the system operation has stopped and you cannot use the ‘Restart’
function of the operating system, reset your device. Be aware that resetting will
cause unsaved data to be lost.
To reset the device, press the <Ctrl+Alt+Del> keys, and select the Restart option
from the Windows shut down screen.