Miele FN 12620 S - Manual (Page 35)

Changing over the door:
^ Open the appliance door.
^ Remove cover a by pulling it
forwards.
^ With the help of a second person,
carefully tilt the appliance backwards
and pull hinge pin b out.
^ Do not lose hinge bush c.
Warning. The appliance door is no
longer secure.
^ Open the door, and pull it
downwards and off.
^ Loosen screws d and take hinge
plate e off.
^ Remove cover f and fit it into the
holes on the opposite side.
^ Unscrew bearing g from hinge plate
e and screw it into the hole on the
other side of hinge plate e.
^ Screw hinge plate e into position on
the opposite side, using the outside
holes (use the long and the round
holes).
If necessary, the second long hole can
be used instead of the round hole for
securing the hinge plate, e. g. when
aligning with uneven flooring.
Changing the door hinging
35