Maxtor SSA-0412 - Manual (Page 15)

1. Front Panel and Remote controller
1-1. Front Panel
The following information will help you operate the front panel controls.
Figure 1.1 Front panel
Table1.1. Indication lamps
Name Description
n
HDD LED light is on when the system is accessing the hard disk.
o
RECORD LED light is on when the system is recording video data.
p
ALARM LED light is on when alarm sensor(s) is/are triggered or motion is detected.
q
NETWORK LED light is on when client is connected to the system through the network.
r
BACKUP LED light is on when USB or CDRW storage device is stored images or video.
Table 1.2. Front panel buttons
Name Description
POWER ON/ OFF. If a password is set for power off in the SYSTEM setup menu, the
system will ask for the password when the power button is pressed. Default P/W is 1111.
Channel keys. Select channel to be displayed in full screen mode.
SEQ Enable/disable the automatic sequential display of channels in full screen and quad
display mode.
PTZ Controls Pan/Tilt/Zoom operations.
SETUP Launch the SETUP menu.
BACKUP Press to capture a still image in live more, or Press to archive still image or video data in
15